- This topic has 2 replies, 3 voices, and was last updated 16 years, 3 months ago by
.
Viewing 3 posts - 1 through 3 (of 3 total)
-
Posts
-
got an aqualtis AQXXL129P1 power to machine but completely dead no lights nothing. no visable signs heater etc tests ok not seen many of these and I’m thinking board anyony had similar?
wilf
Re: aqualtis dead
Could be 3 options: Display board faulty? Main board faulty? or lead through door hinge broken? If you remove BOTH boards and post them to EMW then Tony and the lads can check them out for you (recommended). 💡
Viewing 3 posts - 1 through 3 (of 3 total)
- You must be logged in to reply to this topic.