Ariston and on

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Ariston and on

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • August 24, 2009 at 2:16 pm #48025
    Bill
    Participant

    Model number AWD12 UK when put on a wash cycle the programer knob keeps cycling but when put on a spin prog it seems to work O/K PLEASE can any body help me on this fault.

    Bill Ellis 🙁 😥

    August 24, 2009 at 3:20 pm #295322
    robbra
    Participant

    Re: Ariston and on

    Had one last week. Everthing pointed to the pcb as no other faulty parts. Eight flashes on the light. Got the board from EMW and it worked once then just as you are experiencing. Gave her money back less call out and have now decided never to touch one for this problem again as I’ve had this more than once.
    Just happy EMW do a return system.
    Rob

    August 25, 2009 at 10:09 am #295323
    iadom
    Moderator

    Re: Ariston and on

    Post ‘Unstuck’

    Please do not post general questions as a sticky.

    If everyone did that then to the top of the forum would soon get filled with them. 😉

    If you don’t get an answer then by all means ‘bump’ your thread to the top of the list. 8)

    Jim.

    August 25, 2009 at 3:20 pm #295324
    Bill
    Participant

    Re: Ariston and on

    Jim

    I did know that I had done so.

    Bill Ellis 😡

    August 25, 2009 at 3:33 pm #295325
    iadom
    Moderator

    Re: Ariston and on

    Yep, it was stuck at the top of the board. 🙂

    I will not even go out to an 8 flash Indesit now, have wasted to much time & money trying to sort them with very mixed results. 😥

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.