ARISTON awd1200 Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › ARISTON awd1200 This topic has 2 replies, 2 voices, and was last updated 19 years, 4 months ago by effzedarr. Viewing 3 posts - 1 through 3 (of 3 total) Author Posts November 13, 2006 at 11:47 am #22500 effzedarrParticipant Anybody know the part # for the door release assy that clips on the rear of the fascia? Please,plus are the doors on these m/cs always stiff to open? cheers Chris. November 13, 2006 at 5:04 pm #195232 iadomModerator Re: ARISTON awd1200 Door release button( its called that even though it is the bit inside) 046499 cable, 046496 Not had to change one so cannot comment on your second question. Jim. November 13, 2006 at 6:38 pm #195233 effzedarrParticipant Re: ARISTON awd1200 Cheers Jim ,will check it out! Customer used a broom shaft to push the button right thro’ m/c [old biddy 😕 ], once again thanx. Chris.. 8) Author Posts Viewing 3 posts - 1 through 3 (of 3 total) You must be logged in to reply to this topic. Log In Username: Password: Keep me signed in Log In