Ariston Margherita built in

Home Forums Trade Technical & Spare Parts Forums Trade Spare Parts Ariston Margherita built in

Viewing 11 posts - 1 through 11 (of 11 total)
  • Author
    Posts
  • #18872
    Lawrence
    Participant

    Bit of a long shot this
    No Mod no that I can see just a silver label with 01122 00003 on it
    I need the cosmetic door hinges any one have a part no
    Lawrence

    #180715
    Dave_Conway
    Participant

    Re: Ariston Margherita built in

    To narrow it down a bit, is it a washer or washer/dryer (or neither) ? 😉

    Dave.

    #180716
    Lawrence
    Participant

    Re: Ariston Margherita built in

    sorry it’s the heat cause brain fade ..
    it’s a drawer line washer dryer
    Lawrence

    #180717
    iadom
    Moderator

    Re: Ariston Margherita built in

    Is it a fairly recent one with Evo controls. looks like it will be a C00056261, no doubt spares guru Dave will confirm. 😆

    #180718
    Dave_Conway
    Participant

    Re: Ariston Margherita built in

    Yep, that looks the most obvious one, it fits quite a few models as well 🙂

    Guru 8)

    #180719
    Lawrence
    Participant

    Re: Ariston Margherita built in

    It’s a very old one about 10+ years old, (not Evo)

    #180720
    Dave_Conway
    Participant

    Re: Ariston Margherita built in

    I’m stumped I’m afraid, sorry 🙁

    Dave.

    #180721
    Penguin45
    Participant

    Re: Ariston Margherita built in

    How about K-LB121UK? That’s a 10 year old drawerline built in.

    Chris.

    #180722
    iadom
    Moderator

    Re: Ariston Margherita built in

    Same part number. 🙂

    #180723
    Penguin45
    Participant

    Re: Ariston Margherita built in

    Cleverclogs 😀

    #180724
    Penguin45
    Participant

    Re: Ariston Margherita built in

    Hmm – howsabout that Zerowatt one they bought in? Had a pull out air filter in the control panel……

    Bet that had different hinges 😀

    Chris.

Viewing 11 posts - 1 through 11 (of 11 total)
  • You must be logged in to reply to this topic.