AWO/D4505

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › AWO/D4505

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • January 5, 2010 at 1:19 pm #51392
    spimps
    Participant

    Dead no lights,power to the board.
    Any info on these please? have the sios disc but it’s not onthere.
    BG

    January 5, 2010 at 2:06 pm #307904
    chezza
    Participant

    Re: AWO/D4505

    Is the machine in a garage , outhouse , or other cold environment by chance ?

    January 5, 2010 at 3:58 pm #307905
    spimps
    Participant

    Re: AWO/D4505

    chezza wrote:Is the machine in a garage , outhouse , or other cold environment by chance ?

    No it’s in a laundry room,not heated but reasonable temp in there.
    Is there a known fault with these in a cold ambient and if so what are the parameter temperatures.

    January 5, 2010 at 6:43 pm #307906
    SimonCD
    Participant

    Re: AWO/D4505

    its resistor r020 on pcb. 0.5w 22 ohms.

    January 6, 2010 at 4:24 pm #307907
    spimps
    Participant

    Re: AWO/D4505

    Hi,Was interested in why the question “is it in a cold room”has relevance with a washer.
    haven’t heard of that before and if so below what temp will it not operate.

    January 6, 2010 at 4:32 pm #307908
    chezza
    Participant

    Re: AWO/D4505

    It’s just that I had one in a garage this week with similar faults, and it was so cold there was ice formed inside the drum and on the bellows ; my inquisitive mind was curious as to wether the cold is affecting these, as I have had 3 or 4 whirlpool dryers all faulting due to low ambient conditions ( all outside ) and seemingly anything below 5 deg ambient, they wont run .
    eddie

    January 8, 2010 at 4:27 pm #307909
    SimonCD
    Participant

    Re: AWO/D4505

    dont mention it

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.