azc6470 whirlpool dryer

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › azc6470 whirlpool dryer

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 21, 2013 at 3:12 pm #74249
    scientist
    Participant

    Hi all, checked this dryer out and it seems the motor is siezed. Took the belt off and turned it on and still wouldn’t turn. Tried to turn the shaft on the motor and it does not turn freely. Is this a common fault with Whirlpool dryers? Unit is only 15 months old. Thanks in advance…

    February 21, 2013 at 4:33 pm #390579
    Martin
    Participant

    Re: azc6470 whirlpool dryer

    I’m pretty certain the shaft bearings are easily replaced on these, though I have no clue as to the size of ball race bearing required ( the number is stamped on them anyway) 😀

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.