Bauknecht GSI2330 Dishwasher timer sticks at beginning

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Bauknecht GSI2330 Dishwasher timer sticks at beginning

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • April 18, 2008 at 6:47 am #36117
    Simon46
    Participant

    Ancient Whirlpool integrated dishwasher with the trapeze decor door. timer sticks on first 2 clicks When it purge fills and drains the dishwasher, and suspect no heat on main wash. Filter was clogged. Is there a Toc reset button on heater and would it cause this fault as cust is going to have to snap the plinth to get it off so i can return..

    S.

    April 18, 2008 at 11:27 am #249596
    eastlmark
    Moderator

    seem to think there is a heater toc manual switch but the usual fault is wires breaking in the door loom, used to do a repair kit for it not sure if still available.

    April 21, 2008 at 7:53 am #249597
    Simon46
    Participant

    Re: Bauknecht GSI2330 Dishwasher timer sticks at beginning

    Wire was melted/broken from resettable Toc to heater.

    S.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.