Baumatic BDW13

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Baumatic BDW13

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • April 16, 2009 at 11:09 am #45027
    Kez
    Participant

    This dishwasher is not heating (error code 03) There is only 3v down to the heater – can anyone confirm whether this is likely to be a board fault? Thanks.

    April 16, 2009 at 11:57 am #283352
    subs
    Participant

    Re: Baumatic BDW13

    I take it you have checked the little TOC stat.

    Subs

    April 16, 2009 at 12:54 pm #283353
    Kez
    Participant

    Re: Baumatic BDW13

    Yes.

    April 16, 2009 at 7:52 pm #283354
    A1engineer
    Participant

    Re: Baumatic BDW13

    Kez wrote:This dishwasher is not heating (error code 03) There is only 3v down to the heater – can anyone confirm whether this is likely to be a board fault? Thanks.

    iirc this dw has 2 stats 1 is the standard 1 shot screw type stat the other is at the front comes complete with black holder think it has 2 wires coming from it.

    would be worth checking if it has these if so that’ll probably be were the fault lies..

    April 16, 2009 at 9:23 pm #283355
    aqualectric
    Participant

    Re: Baumatic BDW13

    Have you checked the PCB for blown solder joints?

    Steve.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.