Baumatic D/W Element

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • #26248
    Kirk
    Participant

    I req part number for a Baumatic D/W element BW13 serial number 050615880,

    Thanks Kirk

    #209352
    Dave_Conway
    Participant

    Re: Baumatic D/W Element

    If it’s a BDW13 😉

    Connect show it as BMTXMID1345 🙂

    Dave.

    #209353
    goosegreen
    Participant

    Re: Baumatic D/W Element

    Be carefully ordering on this one, I ordered an element for a BDW13 from connect and presumed the connect picture was incorrect 😥 . No it was the right picture but the wrong part, It turned out to be a hoover element which I already had on the van. Never did get the right part, but with a bit of ingenuity I managed to get another merloni heater to fit, it was 2 days before I finished for christmas, I wasted £30 on a part I already had, And the customer as always had 20 people due to stay with them over the holiday . I told then the truth that I will bodge this element in and if it fails after christmas go and buy a decent machine as this one was a poor copy of an Indisit made in China 😆 😥

    P.S I think I know how to tell if a Merloni look alike has been made in china. Most of the wiring connection seem to have blue insulated crimp terminals rather that bare machine made ones

    Goose

    #209354
    Kirk
    Participant

    Re: Baumatic D/W Element

    Thanks Dave and Goosegreen. I did know the one Dave picked was wrong as I have that one in stock, I do have Servis and Zanussi that look very similar but was hoping to get the correct one.

    Thanks Kirk

Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.