Beko Automatic Washing Machine

Home Forums Trade Technical & Spare Parts Forums Trade Technical Enquiries Beko Automatic Washing Machine

Viewing 6 posts - 1 through 6 (of 6 total)
  • Author
    Posts
  • #11694
    DentedPorsche
    Participant

    Hiyas,
    Going to look at one of these things tomorrow. Complaint is, fills, turns then skips to end leaving drum full of water.
    I’ve not seen it yet so don’t have any model numbers or owt. Just looking for some ideas.

    Thanks
    Brian

    #146282
    Lawrence
    Participant

    Re: Beko Automatic Washing Machine

    I had one of these ,Fitted a timer and module with no success if I emember rightly some of these can have harness problems

    Lawrence

    #146283
    Penguin45
    Participant

    Re: Beko Automatic Washing Machine

    Digi board, it’s always to do with digi boards on these things…… Quite cheap from SEME though. 🙂

    Chris.

    #146284
    Simon46
    Participant

    Re: Beko Automatic Washing Machine

    Ditto on Friday. 🙁

    S.

    #146285

    Re: Beko Automatic Washing Machine

    I’ve got a s/h module off a wm1512s available. Motor was shot. Customer unable to bear 2 week estimated wait. Think I got the timer too.I waive the call out in exchange for parts in cases like this often.(Doesn’t happen too often, fortunately).Guaranteed good £15 incl. post for module. First to see will buy etc. etc. Hope I’m not breaking any rules here.

    #146286
    Dave_Conway
    Participant

    Re: Beko Automatic Washing Machine

    leavemetogetonwithit wrote:Hope I’m not breaking any rules here.

    Not at all 🙂

    Dave.

Viewing 6 posts - 1 through 6 (of 6 total)
  • You must be logged in to reply to this topic.