Beko CTD MODEL.DCU7230

[smeghead]

No heat on this dryer, checked element & reset button at back/ all ok.
Not familiar with Beko, so had pcb apart to check for joints etc- looks Ok.

Any clues anyone or shall I just quote for new PCB.

Dont normally go out to Beko, but its a friend( well , was ’till she rung up & said she got a Beko.)

Any help appreciated.
Clive.

[Seamy]

Re: Beko CTD MODEL.DCU7230

NTC on heater is prone to going low to earth, P.C.Bs also prone to failure, quote for heater & P.C.B to be safe

[smeghead]

Re: Beko CTD MODEL.DCU7230

ok
didn’t check ntc for earth fault to be honest, thanks for feedback , will go & double check ntc.
cheers.

[keithwilliams]

Re: Beko CTD MODEL.DCU7230

any chance of telling us what fixed this in the end please. I didn’t check ntc either but if that’s what fixed yours then I don’t need to order a pcb.
to be honest these are only 180 quid at mo so she might not buy a pcb anyway.

thanks

[Author]

Posts