Beko DCY9316G PCB

This topic has 2 replies, 3 voices, and was last updated 2 years, 2 months ago by Googleit.

Viewing 3 posts - 1 through 3 (of 3 total)

Author

Posts
January 29, 2024 at 3:27 pm #102547

Googleit
Participant

Hello, I am after the main PCB & display board which is housed behind the front facia panel.

Beko DCY9316G 9kg condenser dryer
7188382790
S/N: 21 – 202831 – 10
D999C22

different part sites seem to list 2 boards for this machine however is anyone able to confirm which is the correct one. Thanks

For context the machine is dead, showing no signs of power despite voltage being fed into the board. I have tested everything, mains suppressor, wiring etc and can only conclude the board is faulty.

January 29, 2024 at 8:06 pm #489383

tubafan
Participant

Might be worth checking this thread as there a known ‘no power’ issue on some Beko machines caused by a single diode – https://www.ukwhitegoods.co.uk/forums/forum/public-support-forums/help-and-support/washing-machine-help-forum/861856-beko-wdr7543121w-sudden-no-power

January 29, 2024 at 8:17 pm #489384

electrofix
Moderator

from what i can see its

2969847902

but always double check with any site you buy it off, that way its their fault if its wrong

Dave
Author

Posts

Viewing 3 posts - 1 through 3 (of 3 total)

You must be logged in to reply to this topic.