Beko DE3761FS dishwasher burned heater relay not board

[sprocket25]

Hi

I have a burned heater relay at the contacts. I have replaced it once to see if it would fix fault but seems to be some other fault making it repeatedly click in and out (Buzzing) and burn the contacts within a wash or 2.
The dishwasher operates as normal through all washes apart from having no heater. The first time it failed I remember opening the door after cycle to be greeted with a plume of steam from door so think heater relay must have been stuck on and remember hearing that buzzing noise. when I replaced heater relay it was working till relay failed again.
I dont want to replace the PCB for it to fail straight away.

Hope somebody can help me, Thanks

Russell

[Seamy]

Re: Beko DE3761FS dishwasher burned heater relay not board

Fit new P.C.B

[sprocket25]

Re: Beko DE3761FS dishwasher burned heater relay not board

Seamy wrote:Fit new P.C.B

Hi
Thanks for reply.

What is causing this if you dont mind me asking.
Thanks

[Simon46]

Re: Beko DE3761FS dishwasher burned heater relay not board

I replaced relay on one for heating all the time. A week later heating when finished again!
Now just replace board.
S.

[Andy jones]

Re: Beko DE3761FS dishwasher burned heater relay not board

Have replaced loads of these boards. Cheap enough to not bother trying to repair them

[sprocket25]

Re: Beko DE3761FS dishwasher burned heater relay not board

I have now ordered a new board.

Many thanks to all for the reply’s

[Author]

Posts