Beko dishwasher DIN15X10

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko dishwasher DIN15X10

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 12, 2023 at 3:51 pm #101952
    SWERV
    Participant

    Hi,
    I have a fault with the above dishwasher, where it fill for approx 20 seconds and then it stops P2 flashes. If you open and close the door, it continues to fill until it overfills and then leaks in to the base activating the anti flood device.
    I have checked for blockages and replaced the water flow meter, but it is still the same. Any pointers?

    Thanks
    Merv

    May 12, 2023 at 7:32 pm #486833
    electrofix
    Moderator

    P2 is a no water fault

    have you checked the wiring from the flow meter back to the board.

    Dave

    May 16, 2023 at 8:21 am #486834
    SWERV
    Participant

    Hi Dave,
    yes I did check that.
    I was thinking that if it was a break in the wire, then it could only be the board.

    Merv

    May 16, 2023 at 9:19 am #486835
    electrofix
    Moderator

    board is all that seems to be left

    board is £42 on aswo

    Dave

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.