Beko DSFS1531B All Lights On & not draining

[selhurst sound]

As above really. Beko slim dishwasher, gave up the ghost towards the end of a cycle and there is still water in the bottom of the machine that has not drained. This water is fairly clean so guessing it’s probably from the rinse.

Reset the machine by holding the start button when switching on and now all 5 programme lights are on solid and the buttons don’t do anything.

Reading other posts, looks like it could be PCB fault? Checked the filters and no blockage there, but couldn’t see where to disconnect the drain pipe from the dishwasher to check that out properly.

[Seamy]

Re: Beko DSFS1531B All Lights On & not draining

Most likely something stuck in pump or drain hose.
Power off of course if doing any checks.
Best to take all water out of bottom of dishwasher first with a small glass or cup & use sponge to get the rest.

[Author]

Posts