Beko DW450 Dishwasher

Home Forums Public Support Forums Help And Support Dishwasher Help Forum Beko DW450 Dishwasher

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • #68589
    Keith Greenway
    Participant

    I have a BEKO dw450 slimline dishwasher.
    It has worked well for 3 years until recently, when it developed a fault that stopped the programs being selected. Fortunately it was stuck on the only program we used, so wasn’t too much of a problem.

    A few days ago, when I went to switch it on. all the lights came on, and then faded out leaving just the first circle on.
    It is now impossible to start the washer with the press switch on the far right.

    I have unplugged the appliance, and replaced the control module, as this seems a common place to start with these, but still the same fault.

    Not really quite sure where to look next.

    If any one has any ideas, I would be glad to see them.

    #371898
    kaybezy
    Participant

    Re: Beko DW450 Dishwasher

    type in on your browser, problem with, beko dw450 dishwasher,look for just answer.com, ask.com or fixya.com, speak live to a techno man, but you will have to pay for the info. Keith.

    #371899
    Seamy
    Participant

    Re: Beko DW450 Dishwasher

    You sure the supply is good to the appliance, i’d be checking the circuit from cable to suppressor, to on/off switch, to P.C.B etc, paying attention to cable loom as it passes through bottom of door, they are prone to breaking here.

Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.