Beko DW450 Not heating (but heater works)

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko DW450 Not heating (but heater works)

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • November 24, 2014 at 9:17 am #83153
    peterquill
    Participant

    Hi guys,

    The dishwasher seemed to be in general working order, programmes work, it starts and stops ok, but the water was always cold. I assumed the heating element was damaged, I fitted the new heating element last night but the water is still cold.

    I assume it could be the heating controller or something? Does anyone know what the problem could be and what I should try next?

    Many thanks in advance!

    November 24, 2014 at 10:37 am #421892
    electrofix
    Moderator

    Re: Beko DW450 Not heating (but heater works)

    have you looked at the programmer board for bad solder joint ?

    Dave

    plug out first !

    November 27, 2014 at 10:16 pm #421893
    peterquill
    Participant

    Re: Beko DW450 Not heating (but heater works)

    electrofix wrote:have you looked at the programmer board for bad solder joint ?

    Dave

    plug out first !

    I had a look but couldn’t see anything obvious.
    Is the next step to buy a new programmer?

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.