Beko DWD4310 overheating and not draining

Home › Forums › Public Support Forums › Help And Support › Dishwasher Help Forum › Beko DWD4310 overheating and not draining

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 5, 2017 at 5:34 pm #92317
    jimbosin
    Participant

    My Beko WD 4310W has recently started heating up on the cold cycle and not fully emptying at the end of any cycle. If I hold the start switch in the pump cycles twice, if I repeat this it eventually empties so pump is working ok. Also thumping noise during cycle as if boiling up. Anyone had these faults before?

    October 5, 2017 at 5:36 pm #450940
    Seamy
    Participant

    Re: Beko DWD4310 overheating and not draining

    Replace the P.C.B, suspect the heater relay has welded contacts.

    October 5, 2017 at 5:39 pm #450941
    jimbosin
    Participant

    Re: Beko DWD4310 overheating and not draining

    That was what I suspected, just hoping someone agreed to confirm my suspicions 🙂

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.