Beko S502

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko S502

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 3, 2012 at 8:54 am #70265
    qcarelsen
    Participant

    Hi there,

    Whent to look at above cooker today, hot plates are working but oven and grill not working. Customer said that it has worked and then just stopped. Thought it might be wired up wrong but that was fine. Does any one know if this has got a TOC that will stop it working, I chased all the wires but could not see on, there is a thermal wire on it but that tests ok, switch also looks fine. Just think there is a TOC that I missed.

    Any help will be appreciated.

    Thanks so long.

    Quintin.

    July 3, 2012 at 1:27 pm #377643
    Criscold
    Participant

    Re: Beko S502

    No only the thermal fuse that has been replaced by a cutout kit pt no 4410101001
    Looking at the drawing it looks like the negative feed to the top & bottom oven elements is fed via the grill element ?

    PM if you would like a copy

    Colin

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.