Beko VMA 510W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko VMA 510W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 23, 2008 at 9:04 am #34795
    rocker
    Participant

    set to any programe, cycle starts, goes into fast spin no water in either,
    have checked heater / thermister / pressure switch operates one click which I hope is correct !! sent Pcb to emw for test, no fault found. can anyone advise me what to look for please.
    Cheers John

    February 23, 2008 at 9:49 am #244023
    Washman
    Participant

    Re: Beko VMA 510W

    Hi

    Have you checked motor tacho.

    Mike

    February 23, 2008 at 11:28 am #244024
    rocker
    Participant

    Re: Beko VMA 510W

    Hi Mike, no I havent, do these tend to come loose or go open circuit and can they be purchased if required, proberly take one with me on call back
    Cheers John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.