Beko Washer WM1010

[bassman]

I have never seen one of these machines so I’m unfamiliar with them an old freind has asked me for info he lives a long way so I have tried to help him over the phone apparently the clothes are comming out wet but he says the machine is spinning, I’ve told him to check the filter and make sure the machine is pumping the water out which he’s done but still the same problem so I was wondering if the machine is not going into fast spin maybe the module but I’m not sure if this machine is controlled by a module.
Is anyone familiar with this model.
Thanks Ray

[Micky 32]

Re: Beko Washer WM1010

Might be some sort of blockage like a childs sock in the pipes or a coin lying flat at the inlet of the pump.

[bassman]

Re: Beko Washer WM1010

Thanks for reply Micky32 but I’ve allready told him to check that.
Can anyone tell me if this machine has a module.

[Washman]

Re: Beko Washer WM1010

Hi

According to Connections part list it has a module , but cannot see it on parts drawing.

Mike

[Penguin45]

Re: Beko Washer WM1010

2802090200 is the module, it’s situated under the door lock at the front. If you have wash action but no spin, the fault is more likely to the timer IME.

SEME are cheapest, BTW.

Chris.

[bassman]

Re: Beko Washer WM1010

Thanks for your replys everyone much appreciated

[Author]

Posts