Beko WDC7523002W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WDC7523002W

Viewing 7 posts - 1 through 7 (of 7 total)
  • Author
    Posts
  • December 16, 2021 at 12:24 pm #100354
    oscar123
    Participant

    Beko washer dryer was dead and had the occasional bleep! Fitted new power board and lights up selects programme but won’t start? 2 beeps when start button pressed and door not locking? checked wiring.. anyone had similar problem or ideas?

    December 16, 2021 at 5:06 pm #480267
    kaibart
    Moderator

    Sounds like wrong pcb to me

    December 20, 2021 at 10:22 am #480268
    oscar123
    Participant

    Just checked on Connect there are tow boards for this machine and I ordered the first one.. absolute @ankers if there is no warning ie serial number required 🙁

    December 20, 2021 at 1:12 pm #480269
    electrofix
    Moderator

    looking up the board i get

    2437301141

    cant see any alternatives

    Dave

    December 20, 2021 at 4:17 pm #480270
    murv
    Participant

    Connect list and often keep stock of unprogrammed boards.

    December 22, 2021 at 4:27 pm #480271
    oscar123
    Participant

    obviously sent an unprogrammed board without any warning.. time wasted! 🙁

    December 22, 2021 at 10:27 pm #480272
    murv
    Participant

    Sometimes they specify unprogrammed in the description, but not always. Never undertood why they list them.

    Murv…

  • Author
    Posts
Viewing 7 posts - 1 through 7 (of 7 total)
  • You must be logged in to reply to this topic.