Beko wm6152w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko wm6152w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 2, 2009 at 10:45 pm #46154
    timjam
    Participant

    hi .i have been out to this today, the machine does nothing apart from pump out for a few seconds then repeats after about a min. the spin light is on as is the start /cancel light.I suspect a pcb problem ????? anyone had this problem ? thanks Tim ……

    June 3, 2009 at 7:17 am #288412
    ncas
    Participant

    Re: Beko wm6152w

    have you checked the brushes

    June 4, 2009 at 1:46 pm #288413
    razor
    Participant

    Re: Beko wm6152w

    yip carbons or motor at fault , been to a few of these doing the same pumps out , stops then pumps out again

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.