Beko WM74155

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WM74155

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • June 12, 2018 at 5:20 pm #94054
    ChrisR
    Participant

    Hi guys.
    This machine won’t start.
    The door wasn’t locking so I changed the lock but still no go.
    Just wondering is it likely to be a board fault?.
    The display is working but it won’t start.
    It’s five years old so customer is thinking maybe a new machine but I thought it would be worth asking first.
    Regards.
    Chris.

    June 12, 2018 at 7:23 pm #456290
    kaibart
    Moderator

    Re: Beko WM74155

    Worth checking the brushes and dc module top right corner if these are good then I would say pcb

    June 12, 2018 at 7:49 pm #456291
    ChrisR
    Participant

    Re: Beko WM74155

    Brushes changed by another engineer a few weeks ago.
    Module showed no obvious faults but I don’t think they will go with trying a new one.
    Thanks very much for your input.

    June 12, 2018 at 7:51 pm #456292
    kaibart
    Moderator

    Re: Beko WM74155

    Sounds like the motor has failed then due to overloading

    June 12, 2018 at 8:07 pm #456293
    ChrisR
    Participant

    Re: Beko WM74155

    Thank you.

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.