beko wma 1614

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko wma 1614

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 21, 2008 at 9:21 pm #34761
    alro
    Participant

    hi gents
    no spin on wma1614 washing ok so motor ok any ideas
    no spin on all spin programmes
    cheers alro

    February 22, 2008 at 7:16 pm #243920
    shandy
    Participant

    Re: beko wma 1614

    could pressure system be blocked??

    February 23, 2008 at 9:47 am #243921
    Washman
    Participant

    Re: beko wma 1614

    Hi

    Change Module that is the only way , out of balance detection is corrupt it can think it is out of balance with drum empty.
    I have changed a lot of these. New boards have had the software re written to make them less sensitive to out of balance problems.

    Mike

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.