Beko WMA 510

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA 510

Viewing 5 posts - 1 through 5 (of 5 total)
  • Author
    Posts
  • July 27, 2009 at 1:10 pm #47354
    johnnyj
    Participant

    aT a beko WMA510 will not spin stuck in a never ending attempt of distributing and trying to spin, does anybody have any ideas spoke to somebody local who reckons its the motor but i’m not sure cheers JJ

    July 27, 2009 at 1:13 pm #293201
    wilf
    Participant

    Re: Beko WMA 510

    I’ve fitted several modules for spin fault on these.

    wilf

    July 28, 2009 at 9:25 pm #293202
    bruce118
    Participant

    Re: Beko WMA 510

    Hi, Johnny how you doing? I suspect module also as have had a few on this model.They have been a problem from new, the dealers were complaining about excessive numbers of this model (1000rpm) not spining. Bruce.

    July 28, 2009 at 9:34 pm #293203
    A1engineer
    Participant

    Re: Beko WMA 510

    yep module every time with that fault, unless unbalanced load.

    July 29, 2009 at 5:10 am #293204
    johnnyj
    Participant

    Re: Beko WMA 510

    I got a module from another engoneer who kept a couple from machines that had sheared balance weights of the drum, i had checked the sump, pressure hose pump etc and was going to go back today with module, customer has phoned to say its okay now and spinning good style, i’ll keep ahold of the module as something tellsme i’ll need it, thanks chapps JJ

  • Author
    Posts
Viewing 5 posts - 1 through 5 (of 5 total)
  • You must be logged in to reply to this topic.