Beko WMA1612W control dial clicks round

[floyd23]

Hi folks,

My Beko WMA1612W control just clicks round to the end of any programme I select without the machine filling with water, drum rotating or anything else. I’ve cleaned the pump filter and water inlet filters as suggested in the manual but no joy.

Any ideas? Is this likely to be an electronics problem in the machine.

Any suggestions gratefully received.

Cheers

Floyd

[Penguin45]

Re: Beko WMA1612W control dial clicks round

Tech info on these is not particularly helpful, I’m afraid. It may be that a component has failed out of circuit and that the electronics are aborting the programme – it can equally well be a potty computer board. Without doing a full check with the relevant test equipment it’s an impossible question!

Power off, if you feel like investigating – click the link below for a UKW engineer in your area if you don’t.

Regards,
Penguin45.

[floyd23]

Re: Beko WMA1612W control dial clicks round

Just to let you know. I investigated and found the pump was clogged. All clear now and the machine *touch wood* is working again.

Many thanks

Floyd

[Author]

Posts