Beko WMA1613

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA1613

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • July 25, 2006 at 7:58 pm #19435
    andy2
    Participant

    All this machine does at startup is run the pump for a few minutes then stops. Would i be right in assuming that this is the machines way of signaling a fault somewhere on the machine. there are no lights flashing etc.

    Don’t get many Beko in my area so i would appreciate any help.

    Thanks

    Andy

    August 9, 2006 at 6:02 pm #183082
    Phidom
    Participant

    Re: Beko WMA1613

    It looks like Beko experts are thin on the ground here so I won’t bother asking about one I saw today that had lots of flashing lights but did nowt else.

    August 9, 2006 at 10:27 pm #183083
    andy2
    Participant

    Re: Beko WMA1613

    Yep – its in the bin now so not my worry anymore.

    I sold them a new washer so i am happy 😀 😀 😀

    Andy

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.