Beko WMA1715 Dead

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA1715 Dead

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • October 15, 2007 at 6:59 pm #31395
    johnnyhoz
    Participant

    Hi all
    went to this machinre today, door locks ok, select wash cylce, start light and wash led light up but when start button pressed but after 2 seconds they both go out and the machine does nothing, no flashing lights only the illuminated program selecter and the spin speed leds remain on, any ideas please

    John

    October 15, 2007 at 9:11 pm #231056
    Alanj
    Participant

    Re: Beko WMA1715 Dead

    Hi John,

    you could try the motor plug. Have had a couple of these where the motor plug gets tugged out of the connector causing strange faults.

    Alan

    October 16, 2007 at 4:57 am #231057
    johnnyhoz
    Participant

    Re: Beko WMA1715 Dead

    Thanks Alan had seen a previous post regarding the motor plug and checked but I’ll check again

    John

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.