BEKO WMA17155

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO WMA17155

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • May 21, 2005 at 3:10 pm #9706
    simonb
    Participant

    Hi all, thought i would try you with this one before giving it up as board fault, program will not start and prewash flashes, have checked for loose connections on board or any wires off on componants.

    simon

    May 21, 2005 at 3:24 pm #135372
    Dave_Conway
    Participant

    Re: BEKO WMA17155

    Do Beko’s have any error codes built in ?

    Normally the fault with them is the control unit (if it has one, no info on this model).

    Dave.

    June 16, 2005 at 8:50 am #135373
    Penguin45
    Participant

    Re: BEKO WMA17155

    Got one of these yesterday – “pre-wash” flashing on the programme follower (Apparently “pre-wash” option button flashing is child lock). User book says to turn off and send for the engineer. Everything seemed to meter out acceptably, so have ordered power board from SEME (£37 – not too bad) and I’ll let you know how it works out.

    Chris.

    June 18, 2005 at 8:03 pm #135374
    Penguin45
    Participant

    Re: BEKO WMA17155

    Powerboard it was – fired up and ran immediately.

    Chris.

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.