BEKO WMA1715S

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › BEKO WMA1715S

Viewing 12 posts - 1 through 12 (of 12 total)
  • Author
    Posts
  • August 9, 2005 at 8:10 am #11193
    mike412
    Participant

    THIS MACHINE JUST SITS THERE WITH THE PRE WASH LIGHT FLASHING.
    DOES ANYONE HAVE ANY INFO ON FAULT CODES ETC FOR THIS MACHINE?

    August 9, 2005 at 10:11 am #144307
    Penguin45
    Participant

    Re: BEKO WMA1715S

    Prewash blinks to indicate fault status Mike. If all components meter out, it has to be the power board itself. All the ones I’ve been to with this have turned out to be the PCB. P/no is 2810040110.

    Cheers,
    Chris.

    Edited due to inability to write a proper sentence in English!

    August 9, 2005 at 11:34 am #144308
    mike412
    Participant

    Re: BEKO WMA1715S

    MANY THANKS FOR PROMPT REPLY. WILL FOLLOW THIS UP AND LET KNOW HOW WE GET ON..CHEERS.

    December 7, 2005 at 1:13 pm #144309
    washtec
    Participant

    sorry to drag up an old thread, but how did you get on mike?, Its just that i’ve presently got one doing just this, I have read that the child lock also flashes the prewash button.

    December 7, 2005 at 4:15 pm #144310
    mike412
    Participant

    Re: BEKO WMA1715S

    Customer did not want to spend much money on this machine, so the job
    was not progressed. I must admit I was not disappointed.
    Mike.

    December 7, 2005 at 4:32 pm #144311
    washtec
    Participant

    Re: BEKO WMA1715S

    thanks mike, I have ordered a module for it and have my fingers crossed, and my toes too 🙄

    December 7, 2005 at 7:37 pm #144312
    Penguin45
    Participant

    Re: BEKO WMA1715S

    mike412 wrote:Customer did not want to spend much money on this machine, so the job
    was not progressed. I must admit I was not disappointed.
    Mike.

    Curious – board’s only about £45, so not that dear. The current Bekos are quite decent quality machines.

    Chris.

    December 7, 2005 at 9:00 pm #144313
    leavemetogetonwithit
    Participant

    Re: BEKO WMA1715S

    Penguin45 wrote:The current Bekos are quite decent quality machines.

    Chris.
    The old one’s were good too. Easy to work on and spares cheap. Reliable too.
    Mike.
    PS. I’ll probably get half a dozen BER Bekos next week having posted this.

    December 8, 2005 at 9:05 pm #144314
    washtec
    Participant

    Re: BEKO WMA1715S

    the board was £62.00 with the dreaded vat and and it worked like a dream with the new pcb on it, (the customers dream, not mine), nice little job really. :tup:

    December 9, 2005 at 8:51 am #144315
    Martin
    Participant

    Re: BEKO WMA1715S

    leavemetogetonwithit wrote:Reliable too.

    Do Beko module boards often blow I wonder?

    December 9, 2005 at 8:58 am #144316
    Penguin45
    Participant

    Re: BEKO WMA1715S

    The old 10 + 12 series used to go regularly, the newer ones seem to be a lot more reliable, IME.

    Chris.

    December 9, 2005 at 2:10 pm #144317
    leavemetogetonwithit
    Participant

    Re: BEKO WMA1715S

    I seem to remember the new board for a wm1080 cost me less than £25 from Seme bit over a year ago.
    Mike.

  • Author
    Posts
Viewing 12 posts - 1 through 12 (of 12 total)
  • You must be logged in to reply to this topic.