Beko WMA510W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA510W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • February 26, 2009 at 7:31 pm #43787
    subs
    Participant

    Im thinking this is a board fault on this 18 month old machine but would like some reasurance.
    Start wash programme and machine fills. Once filled machine goes to tumble but whips straight into a spin for a few seconds then stops. No lights flashing just the normal lights stay on i.e start/cancel, door lock and wash. You cant cancel programme or do anything until you turn off and start again. Tried on spin and machine drains then whips staight to fast spin and cuts out. Its like a tacho problem but checked motor and tacho and all seems fine( tacho measured 53h). No signs of damage on board.
    Board?

    Subs

    February 26, 2009 at 7:39 pm #278587
    Penguin45
    Participant

    Re: Beko WMA510W

    Cracked tacho magnet if it’s got a Selni motor will give exactly that symptom.

    Chris.

    February 26, 2009 at 8:07 pm #278588
    subs
    Participant

    Penguin45 wrote:Cracked tacho magnet if it’s got a Selni motor will give exactly that symptom.

    Chris.

    Would it not show an error code?
    Is the tacho replaceble on this motor?

    Thanks

    Subs

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.