beko wma510w

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › beko wma510w

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • June 13, 2010 at 12:45 pm #55203
    robbo1973
    Participant

    hi going here on tues and cust is complaining of clothes shrinking and the machine taking approx 6 hours to complete cycle she says water pressure fine>are the boards prone to failure or the stats/thyermistor

    cheers chris

    June 13, 2010 at 1:08 pm #322278
    timdowning
    Participant

    Re: beko wma510w

    I’ve got a feeling it could be a DIE. Double Installation Error.

    Connected to hot supply & waste pipe too low.

    I had a SIE. Single Installation Error on Thursday.

    Been filling off the hot for four years. I must say the heater & tub were as good as new! She only called me out for a service!

    June 14, 2010 at 7:31 am #322279
    Seamy
    Participant

    Re: beko wma510w

    If its found to be not syphoning, the NTC could be at fault

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.