- This topic has 3 replies, 3 voices, and was last updated 16 years, 11 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Looked at the above today,
completely dead no lights at all, no reaction to any controls.
Power to on/off switch and through to control board, carbons OK, wiring to motor tests sound.
Would a faulty Door interlock give this fault on this Beko ? or can it be the board, the board looks ok no signs of burning.John
Re: Beko WMA520S Dead
Have this very same fault. On inspection what I think is a rectifier diode (electronics boffin…moi 🙁 ) at position DR101 has gone t**ts up. The markings on it appear to be 4007 5360. Am I right in thinking its an IN4007, but what is the other number and does it matter. Would like to give it a try out as it looks like a write off otherwise (eyebrows shut up on mentioning £50 :rolls: )
TC
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.