Beko WMA765W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMA765W

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • February 12, 2007 at 1:42 pm #24973
    ace
    Participant

    Any Beko experts out there, Beko WMA765W, Type 8376C.

    Fault, close door, switch on, then the main wash light flahes continuously, (second light down), the start pause switch light stays off, doesn’t matter which programme you set it on. Heater OK, not sure of thermistor reading.

    Any suggestions welcome, Martin.

    February 12, 2007 at 4:22 pm #204021
    Phidom
    Participant

    Re: Beko WMA765W

    Module problems are quite common on Bekos, have you checked for burnt edge contacts etc?

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.