Beko WMB10W

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Beko WMB10W

Viewing 3 posts - 1 through 3 (of 3 total)
  • Author
    Posts
  • January 6, 2007 at 4:30 pm #23901
    tintin
    Participant

    Hi, can anybody help. This washing machine is overheating and even putting it on a cold wash makes the water boiling hot. First thing I thought, must be the thermostat, but just to back myself up I ordered a heating element as well.

    Went back today and fitted the two parts but still the same problem. The only thing I can think of that it still can be is the programmer, or has anybody seen something different that causes this. Oh, and the machine is just over 6 months old.

    Help will be appreciated.

    Regards,
    TinTin.

    January 6, 2007 at 6:19 pm #199789
    Washman
    Participant

    Re: Beko WMB10W

    Hi

    Went to one yesterday that had been moved by flooring people ,hoses had been reconnected wrong way round so boiled everything becuase it rinsed in very hot water from hot water tank,so it had shrunk to loads of washing.

    Mike

    January 9, 2007 at 3:57 pm #199790
    tintin
    Participant

    Re: Beko WMB10W

    Thanks Mike,

    I will have a look and hope that it is that.

    Cheers.

  • Author
    Posts
Viewing 3 posts - 1 through 3 (of 3 total)
  • You must be logged in to reply to this topic.