beko wmb91442lw

Home › Forums › Public Support Forums › Help And Support › Washing Machine Help Forum › beko wmb91442lw

Viewing 4 posts - 1 through 4 (of 4 total)
  • Author
    Posts
  • July 12, 2015 at 3:55 pm #85511
    psutherland71
    Participant

    Hi
    When switching on our washing machine the door locks and the pump starts then stops, this repeats but nothing else happens. I have replaced the control board and pressure switch. Industrial electrician to trade but never worked on domestic appliances.

    July 12, 2015 at 5:42 pm #428766
    timdowning
    Participant

    Re: beko wmb91442lw

    There has been talk of the motor causing this fault. (check motor brushes if fitted)

    July 12, 2015 at 8:13 pm #428767
    psutherland71
    Participant

    Re: beko wmb91442lw

    Hi, thanks for the reply. It’s a brushless motor but I can’t get any resistance readings from it, ther are 3 thin cables and 2 heavier ones which I assume are the motor supply, I connect 240v to these but nothing happened. I expect the 3 thin cables are for speed control.
    I may order a new motor as I can’t find anything else wrong (they are around £150 🙁 )

    July 18, 2015 at 8:10 am #428768
    psutherland71
    Participant

    Re: beko wmb91442lw

    A new motor has fixed the fault although it was half the price of a new machine.

    Peter

  • Author
    Posts
Viewing 4 posts - 1 through 4 (of 4 total)
  • You must be logged in to reply to this topic.