- This topic has 2 replies, 2 voices, and was last updated 11 years, 9 months ago by
.
-
Posts
-
Hi the above machine is not providing any error codes but will not do final spin properly , visited today motor seems erratic jerky motions and the capacitors seem to be intergrated into the motor looking on the parts list there does not seem to be any motor control seperate from the main board so looks like motor replacement or I may try to solder new capacitors onto the motor ,
Just wondering if anyone had any dealings with these newer beko motors
Cheers Alan
Re: beko wmb91442lw motor problems
The Motor control pcb is inside the motor on these. Beko have been having problems with the diodes in these and the replacement motor may come with an “extension lead” but is a straight forward replacement. No point trying to take any readings through the pins as they all show open cct.
- You must be logged in to reply to this topic.