Beko WME7227 Query

[ascleanasitgets]

I have been given one of the above which I intend to repair. The person who gave me it said that it complets a full cycle in 30 minutes and that it doesn’t take detergent during a full wash only on a short wash. I have done a full test and it seems to work fine for me but I’m reluctant to sell it without exhausting all possibilities.

Do these machines have any known problems that I should be looking for?

Thanks in advance.

[Seamy]

Re: Beko WME7227 Query

Most of these Beko’s have a 30 minute wash anyhow. If it’s doing long programme to quick it could be down to a faulty NTC as it could be thinking heat require was reached & miss out the heating stage.

[ascleanasitgets]

Re: Beko WME7227 Query

Thanks for the reply Seamy…I hadn’t thought of that.

I did do a quick check of the NTC just to see if it was open circuit but didn’t really know what it should read. It was about 10k as I recall. Do you know what it should read at different tempratures?

[ascleanasitgets]

Re: Beko WME7227 Query

Update!

I’m updating this post in the hope it helps somebody else in the future.

After much probing and measuring I discovered that the potentiometer that selcts the programs wasn’t reading correctly at the main control PCB.

It turned out that the small connector which attaches to the program selector wasn’t making a reliable connection.

I cut the plug off and soldered the 3 wires on and the machine now works flawlessly.

[Author]

Posts