Belling Farmhouse 910 grill regulator

[Ray9500]

Hi all,
Has anyone had experience changing a grill regulator on one of these?
It has changed from a Strix version to a Diamond H (082617129), apart from being physically different which makes it hard to fit, being much to big! the wiring appears to be different as well….

if anyone can shed any light on this, i would be grateful 😀
Many thanks
Ray

[DentedPorsche]

Re: Belling Farmhouse 910 grill regulator

Hiya,
In the Diamond H sticky you’ll find the regulator charts, helps a lot changing from one type to another.

Brian

[Ray9500]

Re: Belling Farmhouse 910 grill regulator

Thanks Brian,
I did this but using the chart made it worse! the grill did not work at all, so i wired it from scratch and now it works but the cooling fan doesn’t 🙁

[DentedPorsche]

Re: Belling Farmhouse 910 grill regulator

Hiya,
Don’t know if you’ve sorted this yet.
You’ve not given the model of the Diamond H regulator but I reckon it has to be in the 41ER range.
The wiring diagram for the 910 shows the cooling fan and neon connected to S2 on the original regulator. If the link wire on the new one is missing the neon and fan will not run.

P1 on original to P1 on new.
4 on original to 4a on new.
2 on original to 2 on new.
S2 on original to S2 on new.
Link wire from P1 to 4 on new.

HTH
Brian

[Ray9500]

Re: Belling Farmhouse 910 grill regulator

Many thanks for that Brian 😉

will post results later this week…

[Author]

Posts