belling IDW603

[hilly]

IVE JUST REPLACED THE HINGES ON THIS MODEL IT HAD STRINGS AND SPRINGS THE SPRINGS HAD SNAPPED AND IT BENT THE HINGES BELLING SENT ME SOME HINGES PART NO 246025700 &246025800 THEY ARE A BIT DIFFERENT THERE IS A BAR ACROSS THE HINGE TO STOP IT GOING TOO FAR DOWN SO THE STRINGS ARE’NT NEEDED BUT THE SPRING IS TOO SHORT ON ITS OWN IS THERE A REPLACEMEMT SPRING FOR THIS IM GUESSING ITS A MODIFICATION IF NOT THEY HAVE SENT THE WRONG PART (IM PRAYING ITS A MOD ITS MUCH BETTER THAN THOSE DAFT STRINGS)

THANKS PAUL ❓

[eastlmark]

Re: belling IDW603

We do a version for that for MFI and, as we still use the strings, reckon you may have the wrong hinges there.

[hilly]

Re: belling IDW603

i will have to ring belling 2moro see if they can shed any light thanks 4 reply

paul

[Dave_Conway]

Re: belling IDW603

Those are Merloni (Servis) part numbers, if you look at the picture of the dishwasher:

That’s a Smeg isn’t it ? 😀

Dave.

[hilly]

Re: belling IDW603

belling had sent old stock by mistake the strings and springs are ok
thanks for help

ta paul

[Author]

Posts