Blank Off The Hot To Avoid This Tragedy !!

Home Forums General Trade Forum Blank Off The Hot To Avoid This Tragedy !!

Viewing 6 posts - 16 through 21 (of 21 total)
  • Author
    Posts
  • #224787
    aqualectric
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    Turbo wrote:-
    When I left the owner was digging a grave in the middle of the lawn.

    It’s a heartbreaking experience when a pet dies naturally, but an absolute tragedy to lose one in this way. I’m sure most people on this site would agree with that.
    Could you please pass on our sympathies to the dog owner, Graham. 😥

    Hope you are feeling OK now.

    Steve.

    P.S. I’d PAT test and then run each machine through fill, wash, heat, drain and spin parts of the cycle. They should be OK after drying out for a day or two. To be sure, put a dehumidifier in the room for a couple of days to draw out the water – probably a worthwhile exercise anyway considering the amount of water discharged.

    #224788
    cornwell40
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    Supplied a machine recently to and had run out of caps. The hot was behind the machine so not accessible. Customer insisted he’d sort it out asap rather than me have to come back to it. He didn’t…..it did.
    Got a call six weeks later, carpet in front room wet and kitchen flooring ruined by ‘your washing machine’.
    The tap had been dripping for a while and had caused it. When they realised what the fault was I got me head down and left rapidly…..the sparks were visible miles away 😆


    Tony C

    #224789
    Turbo
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    Thanks for the response on this one, spoke to the owner of the dog Monday and she has been using the washing machine and dryer over the weekend despite my advise to have them checked out first. 😕
    Confirmed what I had assumed that the dog did indeed turn on the hot tap. He suffered from epilepsy which may or may not have been a factor. 😥
    I notice http://www.gofixit.co.uk are selling Brass Blanking Caps for 43p each but they come with a fibre washer. I know someone who uses them and he says they are fine. 😉
    Thanks again
    Graham

    #224790
    andy2
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    My local Travis & Perkins sells these (brass) for 35p + VAT (12 for a fiver)

    Andy 😀

    #224791
    Turbo
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    Dam I did not think anyone would beat 43p 😥
    Well done Andy 😉

    #224792
    paulpaddison
    Participant

    Re: Blank Off The Hot To Avoid This Tragedy !!

    i allways fit the hot tap blanks got mine from glm unifit cant remember price off hand but saves a fortune in insurance costs dont they.

    most machines i have swaped recently i also hadto swap the taps due to them not shutting off propely 😳 this is why when new taps go on i make sure to fit the blank if needed

Viewing 6 posts - 16 through 21 (of 21 total)
  • You must be logged in to reply to this topic.