Blomberg LW1842 not turning anti clockwise

Home › Forums › Trade Technical & Spare Parts Forums › Trade Technical Enquiries › Blomberg LW1842 not turning anti clockwise

Viewing 2 posts - 1 through 2 (of 2 total)
  • Author
    Posts
  • July 25, 2019 at 3:56 pm #96181
    mike100
    Participant

    Spins ok but with slight crackle from motor but wont turn anti clockwise in wash cycle and just sits there.
    Are worn brushes causing that. As integrated not yet taken out.
    Thanks
    Mike

    July 25, 2019 at 10:38 pm #462609
    electrofix
    Moderator

    I doubt it. if there was no circuit in the armature it would not turn either way. but it could just be a dry joint on a relay

    Dave

  • Author
    Posts
Viewing 2 posts - 1 through 2 (of 2 total)
  • You must be logged in to reply to this topic.