- This topic has 3 replies, 3 voices, and was last updated 17 years, 5 months ago by
.
Viewing 4 posts - 1 through 4 (of 4 total)
-
Posts
-
Hey guys. I have a problem with the dishwasher getting stuck at the end of the cycle ”intermittantly” …
There are no blockages in the corrugated pipe and the element tests ok. There is a slight blockage in the larger blue water chamber at the top left corner but that is all. Could it be the pcb?
Re: bosc sgf6902gb/22 – stuck on 1 minute
Minge wrote:Could it be the pcb?
Very much doubt it. It’s usually the pressure chamber sticks, transfer pipe gunged up or heater stuffed!
Viewing 4 posts - 1 through 4 (of 4 total)
- You must be logged in to reply to this topic.