- This topic has 9 replies, 4 voices, and was last updated 18 years ago by
.
-
Posts
-
Does anyone know if its possible to cancel the beeping on a late Bosch machine (at end of cycle) my neighbours been asking me to find out for about a year :rolls:
Re: Bosch beeping.
Oops, 😳 meant ask him to jot down enr but WFL 2872 was what he shouted over fence if memory serves me… i’ll find out 😀
Re: Bosch beeping.
The signal for the “Option buttons” can be switched on and off. This requires that the programme selector is set to “coloureds 30 °C” and simultaneously that the “Start” button is pressed and hold down. When the signal sounds, the setting has been stored into the memory. The volume cannot be adjusted. When an additional function is switched on, a long acoustic signal sounds; when the function is switched off, the acoustic signal is short.
The signal for the programme versions can be switched off before the programme starts and at the end of the programme or set to a different volume. This requires the “Intensive”(Quick) button is pressed and hold down. Release the button at the required volume, the setting has been stored into the memory.HTH
Greg
Re: Bosch beeping.
Cheers Greg 😀 I’ll print this off & stuff it through his letter box. I can now cut my grass without fear..WOOHOO 😛
Re: Bosch beeping.
gegsy wrote:Would be in his user manual if the bugger could be bothered reading it 😆
Funny thing is that in the Bosch User Manual downloads for that model there is no mention of any ‘End of cycle alarm’ at all? 😕
Re: Bosch beeping.
That is odd, if its adjustable its usually in the manual. 😕
Oh well, lets hope Mac is sorted anyway 😀Greg
- You must be logged in to reply to this topic.