BOSCH Classixx 6 water inlet fault

[Marabout]

I have a Classixx 6 1200 washing machine WAE24164GB/22
When I select a programme and Start the machine begins the slow spin but instead of a steady flow of water as the inlet solenoid opens it spurts and stops the flow. This repeats for a long time and then the programme eventually stops and beeps (for attention I assume!).

Anyone seen this fault before?

Is it the solenoid has failed or a controller board fault?

many thanks

Ian

[electrofix]

Re: BOSCH Classixx 6 water inlet fault

sounds like a board fault but easy to check do a voltage check on the solenoid.
if its constant its the valve if it goes on and off its the board

Dave

[Marabout]

Re: BOSCH Classixx 6 water inlet fault

Thanks I’ll check

Ian

[Marabout]

Re: BOSCH Classixx 6 water inlet fault

Voltage pulses. Max I can see on the meter is ~32V.

From your info Dave it’s the controller that’s failed then.

Ian

[electrofix]

Re: BOSCH Classixx 6 water inlet fault

does sound like that. the controller is not giving a constant voltage to the valve. cant think of any other reason other than controller faulty.

there are companies that repair some of these boards

look for EMW electronics and QER

Dave

[Author]

Posts