Bosch D/W SGS43E02GB/43

[subs]

This machine belongs to a friend of mine. The wash pump was operating with no water in it. The pressure / float chamber at the side was clean and micro switches ok. It seemed like a board fault, so i removed the board to look for signs of damage but all looked fine so replaced. It then worked ok and did so for about a week but is now doing the same thing.

Any ideas?

Thanks

Subs

[Martin]

Re: Bosch D/W SGS43E02GB/43

It does sound like a board fault, very odd one though. 😕

[PINKY]

Re: Bosch D/W SGS43E02GB/43

Water points motor blowing a triac? Look again at the pcb, Not unheard of

[Author]

Posts