Bosch Dishwasher SGS 43E02EU.-OVERFILLING

[Welshwizard]

Hi.
I have a Bosch dishwasher that goes into overfill which then puts the pump on for a couple of seconds, fills a bit more, pumps out etc etc. :rolls:
This model has a flow meter fitted on the incoming water supply to the metering tank, but no pressure switch on the metering tank like the earlier Bosch/Hotpoint ones to stop the incoming supply.
It’s obviously a problem with the pressure/level system, but how is the level of water on initial fill determined on this model ❓ ❓
The pipe from the metering tank to the base of the dishwasher is clear, so nothing to restrict the flow.
Hope someone out there can point me in the right direction.
Thanks.
W.

[Penguin45]

Re: Bosch Dishwasher SGS 43E02EU.-OVERFILLING

There is no pressure system. Odds are 75{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} flow meter failure, 25{e5d1b7155a01ef1f3b9c9968eaba33524ee81600d00d4be2b4d93ac2e58cec2d} electronics.

Penguin45.

[Welshwizard]

Re: Bosch Dishwasher SGS 43E02EU.-OVERFILLING

Thanks Penguin.
I’ll go for the flow meter first, and hope that nails it. 🙂
W.

[Author]

Posts