Bosch Dishwasher SGV56A03GB/40 1 min remaining

[Bernie]

Fills, washes and heats up ok does not dry has 1 min remaining on display.
Just keeps running, do not know if it wash or drain pump though, as I have not been there when it does it.
I have meggered the machine which had a reading of 756meg ohms; this was when it was heating on a wash cycle.
Anybody got any suggestions
Thanks Bernie

[Bernie]

Re: Bosch Dishwasher SGV56A03GB/40 1 min remaining

I know I meggered the machine and all was ok but could this still be a faulty heater causing this?
Any help would be much appreciated
Bernie

[Martin]

Re: Bosch Dishwasher SGV56A03GB/40 1 min remaining

1 min remaining could be due to fill or drain time-out? Blocked water inlet matrix? Debris caught in circulating pump? Any number of reasons as well as heater problems of course.:wink:

[Bernie]

Re: Bosch Dishwasher SGV56A03GB/40 1 min remaining

Thanks Martin it gives me some where to start to look
Bernie

[Galway]

Re: Bosch Dishwasher SGV56A03GB/40 1 min remaining

dont know if they are similar but check this link out

http://www.ukwhitegoods.co.uk/modules.p … +remaining

Niall

[Author]

Posts