- This topic has 1 reply, 2 voices, and was last updated 12 years, 9 months ago by
.
Viewing 2 posts - 1 through 2 (of 2 total)
-
Posts
-
This machine is dead with no lights on display .Apparently went off midcycle.
Done most checks and the problem I believe is on the main board in the sump area.There is a large capacitor about 1UF which has bulged on the pvc coating to the top of the component,could this cause this dead condition.steve
Viewing 2 posts - 1 through 2 (of 2 total)
- You must be logged in to reply to this topic.